Anycubic Kobra Neo 3D Printer, Auto Leveling

Anycubic Kobra Neo 3D Printer, Auto Leveling, Max 100mm/s Printing Speed, Resume Printing, 2.4 inch LCD Screen, PEI-coated Metal Sheet, 220*220*250mm

Afhalen is niet mogelijk.

Overzicht van alle producten vind je op eu9.nl

Bij categorie, alle merken met de kortingen.

Alle producten zijn nieuw, en het heeft ook geen zin om erop te bieden, je kan wel even checken

wat de prijs is op dit moment.

Je kan alleen online bestellen, stuur even een bericht om de link aan te vragen.

Alle aangeboden producten komen uit Warehouses die zich in EU landen bevinden, dus er zijn geen invoerkosten.

Geschatte levertijd is anders per warehouse [Land] reken op 3 - 10 werkdagen.

De aangeven prijzen kunnen afwijken omdat het om aanbiedingen gaat, maar dat wordt al vermeld zodra u de link van ons krijgt wat de prijs is.

Betalen kan met Ideal, Paypal, Klarna en alle andere kaarten.

Verzendkosten vanaf gratis tot .... dat is ook per item verschillend.

Highlights

Anycubic Kobra Neo 3D Printer - The Best for Beginners
The Kobra Neo 3D printer is a game changer. It has an easy-to-feed direct drive and a super simple auto bed leveling probe that removes much of the frustrations new makers face. The PEI-coated steel flex plate is a joy to use, grabbing prints tight while hot and completely releasing them when cold. For this reason, the Kobra Neo is considered the Best 3D Printer for Beginners in 2023.

The Anycubic Kobra Neo 3D printer comes with everything you need to get started: tools to build and maintain the printer, side cutters, nozzle cleaner, grease, and a microSD card with a USB adapter. You also get a spare nozzle and a small sample of PLA.

The Kobra Neo arrives 90% pre-assembled and only needs a few bolts to put together. It can be assembled in about 20 minutes. The wiring is clearly marked and easy to plug into place.

The Anycubic Kobra Neo comes with an inductive automatic bed leveling sensor, which uses a non-contact magnetic probe. This is the same leveling sensor on the standard Kobra and Kobra Go, which detects the metal surface of the build plate while hovering a few millimeters above it. There are no knobs for manual tramming and everything is done through the printer’s touch screen.

To level the bed, select Menu from the home screen. Then select Leveling →Auto Leveling and the printer takes care of the rest. It will home the bed, heat up, then double tap 25 spots in a grid across the bed surface. The sensor hovers a few millimeters above the bed, not allowing the nozzle to touch during the process.

It’s important to note the auto leveling can only tell where the sensor is located, not the nozzle itself. The next step is to set the Z height, which places the nozzle at the perfect distance from the bed. See our handy guide on bed leveling to get an idea of how close you should get.

The Anycubic Kobra NEO has a direct drive tool head – meaning that the extruder gears, fans, and hotend are all in one small package. This makes filament loading a lot easier for beginners with everything in front of the machine.

To load filament, press Menu on the home screen, then Prepare, and finally Preheat PLA (or Preheat ABS for a higher setting). Place the filament in the hole at the top of the drive and once it is hot it will grab on. Press stop when the filament begins to flow from the nozzle. You WILL need to be on standby to press stop, it will not stop on its own.

Removing the filament works the same, just in reverse. Let the tool head preheat, select Filament Unload and let the gears back the filament out. Remove the filament when there is no more tension on the plastic.

The Anycubic Kobra Neo is only slightly different in design from the original Kobra and nearly identical to